Bibliometric analysis of current trends in regulations used in oil storage tanks
Análisis bibliométrico sobre las tendencias actuales de la normativa utilizada en tanques de almacenamiento de petróleo
Article Sidebar
PDF (Español) (Español (España))
FLIP
HTML (Español (España))
La Revista ofrece Acceso Abierto bajo una licencia Creative Commons Attibution License
Esta obra está bajo una Licencia Creative Commons Atribución - No comercial - 4.0 Internacional.
Main Article Content
Perfil Google Scholar
Petroleum, a natural resource formed from the decomposition of organic matter over millions of years, is widely used as fuel in vehicles, heating units, and plastic production. Its extraction and processing serve as key drivers of the global economy and geopolitics, as it serves as a raw material for a variety of products, from plastics to fuels and fertilizers. Therefore, this study aims to provide an overview of the historical evolution of petroleum storage tanks and the norms of the American Petroleum Institute (API), using bibliometric analysis of high-impact sources from the Scopus database, with the purpose of identifying trends in authors, countries, journals, institutions, and collaborative networks. The results showed an annual growth rate of 1.07% from 1972 to 2022 in the thematic area concerning API standards and petroleum storage tanks primarily. The articles were authored by approximately 316 individuals, predominantly from the United States, Iran, China, Turkey, and Canada, which accounted for 58% of the total analyzed publications (159). Additionally, it was evidenced that the most relevant author is Guzey S, who utilized a large number of keywords associated with their research published in the American Society of Mechanical Engineers, Pressure Vessels and Piping Division journal.
Downloads
Article Details
J. Chen, “Petroleum,” WebPage, 2022. [Online]. Available: https://www.investopedia.com/terms/p/petroleum.asp.
P. Guerrero-Torre, “Estimación de costos en proyectos metalmecanicos y su aplicación al área petrolera,” Escuela Politécnica Nacional, 2013.
W. B. Geyer, Handbook of Storage Tank Systems: Codes: Regulations, and Designs 1st Edición, CRC Press. USA: CRC Press, 2000.
R. A. García-León, M. T. Crespo-Guerra, M. Grave-Capistran y A. Ruiz-Rios, “Gráficos triangulares del comportamiento físico de arcillas utilizadas para la fabricación de productos de mampostería en Colombia,” Rev. Ingenio, vol. 16, no. 1, pp. 50–55, 2019, doi: https://doi.org/10.22463/2011642X.2353.
R. A. García-León, J. Herrera-Perea, and J. Cerón-Guerrero, “Improvement of the mechanical properties of nodular gray cast iron with the application of heat treatments,” Rev. Ingenio, vol. 17, no. 1 SE-Artículos de Investigación, pp. 21–27, Jan. 2020, doi: https://doi.org/10.22463/2011642X.2653.
I. Freitas de Almeida, M. Castelo Branco y R. Almeida de Oliveira, “Estudio comparativo en el diseño a flexión y cortante para zapatas corridas,” Rev. Ingenio, vol. 16, no. 1 SE-Artículos de Investigación, pp. 23–29, Jan. 2019, doi: https://doi.org/10.22463/2011642X.2364.
R. A. García-León, E. N. Flórez-Solano y G. Guerrero-Gómez, “Construcción de un banco de pruebas de medidores de flujo para el laboratorio de mecánica de fluidos de la Universidad Francisco de Paula Santander Ocaña,” Rev. Ingenio, vol. 14, no. 1 SE-Artículos de Investigación, pp. 19–26, Jul. 2017, doi: https://doi.org/10.22463/2011642X.2191.
E. S. López et al., “Bibliometry, an eficcient to assess the postgraduate scientific activity,” Medisur, vol. 7, no. 4, pp. 291–294, 2009.
T. A. Escorcia Otálora, “Análisis bibliométrico como herramienta para el seguimiento de publicaciones científicas, tesis y trabajos de grado,” Pontificia Universidad Javeriana, 2008.
R. D. Buitrago-Pulido, “Análisis bibliométrico sobre la producción científica en distribución en planta en la red Redalyc durante el periodo 2007 - 2017,” Sci. Tech., vol. 24, no. 3 SE-Industrial, pp. 446–450, Sep. 2019, doi: https://doi.org/10.22517/23447214.21401.
SNIES-Mineducación, “Sistema Nacional de Información de la Educación Superior,” WebPage, 2022, [Online]. Available: https://hecaa.mineducacion.gov.co/consultaspublicas/ies.
I. F. Aguillo, “Is Google Scholar useful for bibliometrics? A webometric analysis,” Scientometrics, vol. 91, no. 2, pp. 343–351, 2012, doi: https://doi.org/10.1007/s11192-011-0582-8.
R. A. García-León, J. Martínez-Trinidad and I. Campos-Silva, “Historical Review on the Boriding Process using Bibliometric Analysis,” Trans. Indian Inst. Met., vol. 74, no. March, pp. 541–557, 2021, doi: https://doi.org/10.1007/s12666-020-02174-6.
R. Pico-Saltos, P. Carrión-Mero, N. Montalván-Burbano, J. Garzás, and A. Redchuk, “Research Trends in Career Success: A Bibliometric Review,” Sustainability , vol. 13, no. 9. 2021, doi: https://doi.org/10.3390/su13094625.
M. Visser, N. J. van Eck, and L. Waltman, “Large-scale comparison of bibliographic data sources: Scopus, Web of Science, Dimensions, Crossref, and Microsoft Academic,” Quant. Sci. Stud., vol. 2, no. 1, pp. 20–41, Apr. 2021, doi: https://doi.org/10.1162/qss_a_00112.
M. Aria and C. Cuccurullo, “bibliometrix : An R-tool for comprehensive science mapping analysis,” J. Informetr., vol. 11, no. 4, pp. 959–975, 2017, doi: https://doi.org/10.1016/j.joi.2017.08.007.
R. A. García-León, J. A. Gómez-Camperos, and H. Y. Jaramillo, “Scientometric Review of Trends on the Mechanical Properties of Additive Manufacturing and 3D Printing,” J. Mater. Eng. Perform., 2021, doi: https://doi.org/10.1007/s11665-021-05524-7.
E. Espinel-Blanco, E. N. Flórez-Solano y J. E. Barbosa-Jaimes, “Estudio para la generación de energía por un sistema con paneles solares y baterías,” Rev. Ingenio, vol. 17, no. 1 SE-Artículos de Investigación, pp. 9–14, Jan. 2020, doi: https://doi.org/10.22463/2011642X.2392.
M. Pantusheva, “Seismic Analysis of Steel Storage Tanks: Overview of Design Codes Used In Practice.” Zenodo; University of Architecture, Civil Engineering and Geodesy, Sofia, Dec. 2023, doi: https://doi.org/10.5281/zenodo.10359429.
P. Pinilla-Pérez, “Sostenibilidad económica y medio ambiente en Colombia: muchas normas y poca aplicabilidad,” Rev. Ingenio, vol. 5, no. 1 SE-Artículos, pp. 78–84, Dec. 2012, doi: https://doi.org/10.22463/2011642X.2175.
