Evaluation of the plastic injection machine maintenance system through the TOPSIS method

  • Jesús Manuel Calvillo-Guevara Universidad Autónoma de Ciudad Juárez
  • Luis Pérez-Domínguez Universidad Autónoma de Ciudad Juárez
  • Luz Angélica Garcia Villalba Universidad Autónoma de Ciudad Juárez
Palabras clave: Efficiency Evaluation Machines Manufacturing Methods Processes TOPSIS

Resumen

The following document talks about the parameters of the maintenance system implemented in plastic injection machines of a maquiladora company located in Ciudad Juarez Chihuahua. The method used in this investigation is essentially ulti-criteria decision making, the technique for the order of preference for similarity to the ideal TOPSIS solution. Therefore, an evaluation of the maintenance system is carried out, using measurable collected in said company. With this evaluation the plastic injection machine is determined in better conditions, as well as the machine in worse conditions, which helps management to make better decisions regarding each machine. The objective of this research is to address the study of decision-making in the industrial field specifically in the maintenance system of plastic injection molding machines.

Referencias

K.-J. Y. M.-S. H. Jian-Yu Chen, «Online quality monitoring of molten resin in injection molding,» International Journal of Heat Mass Transfer, pp. 681-693, 2018.

A. M. Gutierrez, MANTENIMIENTO Planecion, ejecucion y control, Mexico D.F: Alfaomega Grupo Editor, 2009.

M. D. Kobbacy K, Complex System Maintenance Handbook, Springer: Springer Series in Reliability Eng, 2008.

L. Swason, «An information-processing model of maintenance management,» International Journal of Production Economics., pp. 45-64, 2003.

A. K. F. R. Nurcahyo, «Maintenance Program Selection in Cigarette Manufacturing Industry With Multi-Criteria Decision-Making Method,» IEEE International Conference on Engineering Technologies and Applied Sciences (ICETAS), 2017.

P. B. R. G. S. R. Radim Bris, «Discrete maintenance optimization of complex multi components systems,» Reliability Energinering and Systems Safety, pp. 80-89, 2017.

S. R. C. Y. Hongyan Dui, «A cost-based integrated importance measure of system components for preventive maintenance,» Reliability Engineering & System Safety, vol. 168, pp. 98-104, 2017.

X. Z. Biao Lu, «Opportunistic preventive maintenance scheduling for serial-parallel multistage manufacturing systems with multiple streams of deterioration,» Reliability Engineering & System Safety, vol. 168, pp. 116-127, 2017.

J. W. G. U. K. Ramin Karim*, «Maintenance Analytics - The New Know in Maintenance,» IFAC (International Federation of Automatic Control), pp.214-219, 2016.

A. B. N. P. B. M. D. A. G. Mentzas, «A Proactive Event-driven Decision Model for Joint Equipment Predictive Maintenance and Spare Parts Inventory Optimization,» de The 5th International Conference on Through-life Engineering Services (TESConf2016), 2017.

S. K. A. L. E. N. l. K. R. S. B. John Ahmet Erkoyuncua, «Perspectives on trading cost and availability for corrective maintenance at the equipment type level,» Reliability Engineering & System Safety, vol. 168, pp. 53-69, 2017.

I. L. J. A. Sandrina Vilarinho, «Preventive Maintenance Decisions through Maintenance Optimization Models: A Case Study,» Procedia Manufacturing, vol. 11, pp. 1170-1177, 2017.

A. S. C. B. J. S. Jon Bokrantz, «Maintenance in digitalised manufacturing: Delphi-based scenarios for 2030,» International Journal of Production Economics, vol. 191, pp. 154-169, 2017.

A. G.-M. S. D. Z. A. W. Erray, «Integrated Maintenance-Quality policy with rework process under improved imperfect preventive maintenance,» Reliability Engineering & System Safety, pp. 1-11,2018.

Y. Z. J. A. S. R. M. Karlberg, «Maintenance processes modelling and optimisation,» Reliability Engineering & System Safety, pp. 150-160, 2017.

Y. C. T. J. Yu Liu, «On Sequence Planning for Selective Maintenance of Multi-State Systems under Stochastic Maintenance Durations,» European Journal of Operational Research, 2018.

C. F. A. L. S. Miranda, «Sustainable Maintenance: a Periodic Preventive Maintenance Model with Sustainable Spare Parts Management,»IFAC-PapersOnLine, vol.50, pp.13692-13679, 2017.

E. J. Bramde Jongea, «Optimizing blockbased maintenance under random machine usage,» European Journal of Operational Research, vol. 265, pp. 703-709, 2018.

MirigulAltan, «Reducing shrinkage in injection moldings via the Taguchi, ANOVA and neural network methods,» Materials & Design, pp. 599-604, 2010.

H. Zhou, « Computer Modeling For Injection Molding,» A John Wiley & Sons, Inc., Publication,2003.

M.-S. H. Jian-YuChen, «Online quality monitoring of molten resin in injection molding,» International Journal of Heat and Mass Transfer, pp. 681-693, 2018.

A. A. T. T. &. S. P. J., «Part-out-based spares provisioning management: A military aviation maintenance case study.,» Journal of Quality in Maintenance Engineering, vol. 20, nº 1, p. 76–95.,(2014).

G. C. F. &. Y. M. M. J. M., « Changing role of maintenance in business organisations: Measurement versus strategic orientation.,» International Journal of Production Research, vol. 54, nº 11, p. 3329–3346, 2016.

V. Narayan, «Business performance and maintenance.,» Journal of Quality in Maintenance Engineering, vol. 18, nº 2, p. 183–195., 2012.

M. S. &. A. A. H. Shaaban, « Critical success factors for total productive manufacturing (TPM) deployment at Egyptian FMCG companies.,» Journal of Manufacturing Technology Management, vol. 25, nº 3, pp. 393-414, 2014.

A. K. N. K. F. M. S. &. A. R. Noroozi, «The role of human error in risk analysis: Application to pre-and post-maintenance procedures of process facilities,» Reliability Engineering & System Safety, vol. 119, p. 251–258, 2013.

N. K. A. Y. D. &. M. D. P. Graham, «Managerial role in ensuring successful total quality management programme in Ghanaian printing firms,» The TQM Journal, vol. 26, nº 5, p. 398–410, 2014.

B. G. A. &. P. R. Bouslah, «Integrated production, sampling quality control and maintenance of deteriorating production systems with AOQL constraints.,» Omega, vol. 61, p. 110–126, 2016.

A. K. U. G. D. &. S. C. Parida, «Performance measurement and management for maintenance: A literature review,» Journal of Quality in Maintenance Engineering, vol. 21, nº 1, p. 2–33, 2015.

A. M. S. L. T. V. M. &. S. S. Gosavi, « A budgetsensitive approach to scheduling maintenance in a total productive maintenance (TPM) program,» Engineering Management Journal, vol. 23, nº 3, p.46–56, 2011.

J. S. V. K. &. A. G. Kumar, «Impact of TPM implementation on Indian manufacturingindustry,» International Journal of Productivity and Performance Management, vol. 65, nº 1, p. 44–56, 2014.

L. B. H. Zídková, «Use of the ppm and its function in the production process,» Procedia Manufacturing, pp. 608-615, 2017.

J.-J. H. Gwo-Hshiung Tzeng, Multiple Attribute Decision Making: Methods and Applications, New York: Taylor & Francis Grup, 2011.

Cómo citar
Calvillo-Guevara, J. M., Pérez-Domínguez, L., & Garcia Villalba, L. A. (2019). Evaluation of the plastic injection machine maintenance system through the TOPSIS method. Respuestas, 24(1), 20-31. https://doi.org/10.22463/0122820X.1794

Descargas

La descarga de datos todavía no está disponible.
Publicado
2019-01-01
Sección
Artículos de Investigación