Estado del arte del uso de nano materiales en suelos para construcción de carreteras

Review of the use of nanomaterials in soils for construction of roads

Contenido principal del artículo

Jhon Fredy Rincón-Morantes
Oscar Javier Reyes-Ortiz
Juan Carlos Ruge-Cárdenas


Los nano materiales toman cada vez más relevancia en la construcción de obras civiles, ya que se pueden usar como adiciones o aditivos para mejorar y estabilizar concretos asfalticos, concretos hidráulicos, suelos finos a nivel de sub rasantes, sub bases, bases e inclusive para filtros en el tratamiento de aguas. El presente artículo pretende recolectar las distintas experiencias plasmadas por la ciencia en el uso de nano materiales, con el fin de estabilizar o mejorar las propiedades mecánicas y geotécnicas de los suelos usados en la construcción de vías, sobre todo lo que tiene que ver con la fabricación de nano fibras para uso en los suelos; encontrándose que su uso en el campo de las carreteras está por investigarse y desarrollarse con diferentes tipos de soluciones, pues las más estudiadas son las nano fibras de carbono

Palabras clave:


Los datos de descargas todavía no están disponibles.

Detalles del artículo

Biografía del autor/a (VER)

Jhon Fredy Rincón-Morantes, Escuela Militar de Cadetes “General José María Córdova”

Magister en Infraestructura Vial

Oscar Javier Reyes-Ortiz, Universidad Militar Nueva Granada

Doctor en Gestión del Territorio e Infraestructura

Juan Carlos Ruge-Cárdenas, Universidad Militar Nueva Granada

Doctor en Geotecnia

Referencias (VER)

G. P. Makusa, “State of the Art Review Soil Stabilization Methods and Materials,” J. State Art Rev., pp. 1–30, 2012.

F. G. Bell, Engineering Treatment of Soils, 1 st. London: E & FN Spon Taylor & Francis Group, 1993.

K. C. Onyelowe, “Soil stabilization techniques and procedures in the developing countries-Nigeria,” Glob. Jour. Engg. Tech., vol. 5, pp. 65–69, 2012.

A. S. Rajpura, “Review of Industrial Waste Used In Stabilization of Expansive Soil in Road Subgrade,” Int. J. Adv. Res. Ideas Innov. Technol., vol. 3, no. 2, pp. 1124–1127, 2017.

Y. C. Fung and S. R. Kaniraj, “Comparison of the behavior of fiber and mesh reinforced soils,” J. Civ. Eng. Sci. Technol., vol. 8, no. 2, pp. 82–88, 2017.

S. Gowthaman, K. Nakashima, and S. Kawasaki, “A state-of-the-art review on soil reinforcement technology using natural plant fiber materials: Past findings, present trends and future directions,” Materials (Basel)., vol. 11, no. 4, 2018.

A. Tiwari and H. K. Mahiyar, “Experimental Study on Stablization of Black Cotton Soil by Fly,” Int. J. Emerg. Technol. Advandced Eng., vol. 4, no. 11, pp. 330–333, 2014.

H. Sarbaz, H. Ghiassian, and A. A. Heshmati, “CBR strength of reinforced soil with natural fibres and considering environmental conditions,” Int. J. Pavement Eng., vol. 15, no. 7, pp. 577–583, 2014.

R. R. Singh and E. S. Mittal, “Improvement of Local Subgrade Soil for Road Constuction By the Use of Coconut Coir Fiber,” Int. J. Res. Eng. Technol., vol. 3, no. 5, pp. 707–711, 2014.

M. Ali, “Coconut fibre: A versatile material and its applications in engineering,” J. Civ. Eng. Constr. Technol., vol. 2, no. 9, pp. 189–197, 2011.

J. Camacho Tauta, O. J. Reyes Ortiz, and C. Mayorga Antolínez, “Curado natural y acelerado de una arcilla estabilizada con aceite sulfonado,” Ing. y Desarro., no. 24, pp. 48–62, 2008.

W. JvdM Steyn, “Applications of Nanotechnology in Road Pavement Engineering,” Nanotechnol. Civ. Infrastruct., pp. 49–83, 2011.

Z. Ge and Z. Gao, “Applications of nanotechnology and nanomaterials in construction,” First Inter. Confer. Construc. Dev. Ctries., pp. 235–240, 2008.

J. M. Makar and J. J. Beaudoin, “Carbon nanotubes and their application in the construction industry,” 1st Int. Symp. Nanotechnol. Constr., pp. 331–341, 2003.

F. Jarrahzade and M. S. Bajestan, “Changing clay structure by nanotechnology due to soil,” Int. Congr. Nanosci. Nanotechnol., pp. 1–2, 2010.

S. S. Su and I. Chang, “Review of Production Routes of Nanomaterials,” Commer. Nanotechnologies-A Case Study Approach, pp. 15–29, 2018.

M. E. Abdullah et al., “A review on the exploration of nanomaterials application in pavement engineering,” J. Teknol., vol. 73, no. 4, pp. 69–76, 2015.

W. Steyn, “Research and application of nanotechnology in transportation,” South. African Transp. Conf., no. July, pp. 345–353, 2008.

S. Chandni Dipak and D. Srirama, “A review of stabilization of expansive soils by using nanomaterials,” 50th INDIAN Geotech. Conf. 17th – 19th DECEMBER 2015, no. December, p. 8, 2015.

W. Zhu, P. J. M. Bartos, and A. Porro, “Application of nanotechnology in construction Summary of a state-of-the-art report,” Mater. Struct. Constr., vol. 37, no. 273, pp. 649–658, 2004.

J. Koo, “An Overview of Nanoparticles,” in Polymer Nanocomposites: Processing, Characterization and Applications, O. Manasreh, Ed. McGraw-Hill: New York , Chicago, San Francisco, Lisbon, London, Madrid, Mexico City, Milan, New Delhi, San Juan, Seoul, Singapore, Sydney, Toronto, 2006, pp. 9–49.

D. A. Patel and C. B. Mishra, “Nano Material for Highway Infrastructure,” Kalpa Publ. Civ. Eng., vol. 1, pp. 321–328, 2017.

J. Larsen Basse and K. P. Chong, “Nanomaterials in construction and rehabilitation: Contributions and perspectives of the US National Science Foundation,” NICOM 2 2nd Int. Symp. Nanotechnol. Constr., pp. 17–25, 2006.

K. C. Onyelowe and F. O. Okafor, “Review of the synthesis of nano-sized ash from local waste for use as admixture or filler in engineering soil stabilization and concrete production,” J. Environ. Nanotechnol., vol. 4, no. 4, pp. 23–27, 2015.

T. W. Lambe and R. V. Whitman, Soil Mechanics. New York: John Wiley & Sons, 1969.

P. Luhana, J. Pitroda, and L. B. Zala, “Nanotechnology in Flexible Pavement,” Int. J. Sci. Res., vol. 2, no. 1, pp. 10–12, 2013.

L. J. Castillo, “State-of-the-art review of the applications of nanotechnology in pavement materials,” Texas A&M University-Kingsville, 2014.

G. D. Lopez and M. S. Ambrosini, “Nanotechnology in Soil Stabilization : Economic Feasibility,” in 13er Congreso Internacional en Ciencia y Tecnología de Metalurgia y Materiales 2013, 2016, no. August 2013, p. 8.

W. P. Grogan and W. G. Johnson, “Stabilization of high plasticity clay and silty sand by inclusion of discrete fibrillated polypropylene fibers (fibergrids®) for use in pavement subgrades,” Washington, DC, 1994.

A. S. Zaimoglu and T. Yetimoglu, “Strength Behavior of Fine Grained Soil Reinforced with Randomly Distributed Polypropylene Fibers,” Geotech. Geol. Eng., vol. 30, no. 1, pp. 197–203, 2012.

P. K. Pradhan, R. K. Kar, and A. Naik, “Effect of random inclusion of polypropylene fibers on strength characteristics of cohesive soil,” Geotech. Geol. Eng., vol. 30, no. 1, pp. 15–25, 2012.

W. R. Azzam, “Reduction of the Shrinkage–Swelling Potential with Polymer Nanocomposite Stabilization,” J. Appl. Polym. Sci., vol. 123, pp. 299–306, 2011.

G. K. Athulya, S. Dutta, and J. N. Mandal, “Performance evaluation of stabilised soil–slag mixes as highway construction material,” Int. J. Geotech. Eng., vol. 11, no. 1, pp. 51–61, 2017.

S. Gelsefidi and S. Alireza, “Application of Nanomaterial to Stabilize a Weak Soil,” Int. Conf. Case Hist. Geotech. Eng. - Seventh Int. Conf. Case Hist. Geotech. Eng. Apr, 2013.

M. A. Pashabavandpouri and S. Jahangiri, “Effect of nano silica on swelling, compaction and strength properties of clayey soil stabilized with lime,” J. Appl. Environ. Biol. Sci., vol. 5, pp. 538–548, 2015.

F. Changizi and A. Haddad, “Strength properties of soft clay treated with mixture of nano-SiO2and recycled polyester fiber,” J. Rock Mech. Geotech. Eng., vol. 7, no. 4, pp. 367–378, 2015.

Z. H. Majeed and M. R. Taha, “An Analysis on Geotechnical Properties of Soil with Different Nanomaterials An Analysis on Geotechnical Properties of Soil with Different Nanomaterials,” no. December, pp. 92–104, 2016.

J. L. Coo, Z. P. S. So, and C. W. W. Ng, “Effect of nanoparticles on the shrinkage properties of clay,” Eng. Geol., vol. 213, pp. 84–88, 2016.

M. R. Taha and O. M. E. Taha, “Influence of nano-material on the expansive and shrinkage soil behavior,” J. Nanoparticle Res., vol. 14, no. 10, 2012.

F. Changizi and A. Haddad, “Effect of nanocomposite on the strength parameters of soil,” KSCE J. Civ. Eng., vol. 21, no. 3, pp. 676–686, 2017.

M. Zahedi, M. Sharifipour, F. Jahanbakhshi, and R. Bayat, “Nanoclay Performance on Resistance of Clay under Freezing Cycles,” J. Appl. Sci. Environ. Manag., vol. 18, no. 3, pp. 427–434, 2014.

N. Khalid and M. F. Arshad, “Influence of Nano-Soil Particles in Soft Soil Stabilization,” Electron. J. Geotech. Eng., vol. 20, no. January 2015, pp. 731–738, 2015.

A. A. Firoozi, M. R. Taha, and A. A. Firoozi, “Nanotechnology in Civil Engineering,” Electron. J. Geotech. Eng., vol. 19, no. July 2016, p. 12, 2014.

K. C. Onyelowe, “Nanosized palm bunch ash (NPBA) stabilisation of lateritic soil for construction purposes,” Int. J. Geotech. Eng., no. October, pp. 1–9, 2017.

P. P. Kulkarni and J. N. Mandal, “Performance assessment of stabilized soil with fly ash- nano material mixes,” J. Geotech. Transp. Eng., vol. 3, no. 2, pp. 35–46, 2017.

O. S. Aderinola and E. S. Nnochiri, “Stabilizing Lateritic Soil Using Terrasil Solution,” Sel. Sci. Pap. - J. Civ. Eng., vol. 12, no. 1, pp. 19–28, 2017.

O. O. . Ugwu, J. B. . Arop, C. U. . Nwoji, and N. N. . Osadebe, “Nanotechnology as a preventive engineering solution to highway infrastructure failures,” J. Constr. Eng. Manag., vol. 139, no. 8, pp. 987–993, 2013.

S. Roshni and S. P. Jeyapriya, “Experimental Study on the use of Nano Chemical and Cement in the modification of Subgrade,” Int. J. Sci. Eng. Res., vol. 8, no. 3, pp. 1868–1872, 2017.

M. Lotfalian, A. Parsakhoo, and A. Savadkoohi, “Improvement of forest road gravel surfacing quality by nano-polymer CBR PLUS,” Croat. J. For. Eng., vol. 37, no. 2, pp. 345–352, 2016.

S. E. Mousavi and A. Karamvand, “Assessment of strength development in stabilized soil with CBR PLUS and silica sand,” J. Traffic Transp. Eng. (English Ed., vol. 4, no. 4, pp. 412–421, 2017.

P. Govindasamy, M. R. Taha, J. M. A. Alsharef, and K. Ramalingam, “Influence of nanolime and curing period on unconfined compressive strength of soil,” Appl. Environ. Soil Sci., vol. 2017, p. 9, 2017.

Z. M. Huang, Y. Z. Zhang, M. Kotaki, and S. Ramakrishna, “A review on polymer nanofibers by electrospinning and their applications in nanocomposites,” Compos. Sci. Technol., vol. 63, no. 15, pp. 2223–2253, 2003.

M. Kurečič and M. Sfiligoj Smole, “Electrospinning: Nanofibre Production Method,” Tekstilec, vol. 56, no. 1, pp. 4–12, 2013.

M. Olvera Gracia, J. R. Aguilar Hernández, and T. Kryshtab, “Procesamiento de micro y nanofibras de polipirrol/óxido de polietileno/nylon-6 por la técnica de electrohilado**Citación estilo Chicago Olvera-Gracia, Manuel, Jorge Ricardo Aguilar-Hernández, Tetyana Kryshtab. Procesamiento de micro y nanofibras de polipi,” Ing. Investig. y Tecnol., vol. 14, no. 4, pp. 575–581, 2013.

J. Xue, J. Xie, W. Liu, and Y. Xia, “Electrospun Nanofibers: New Concepts, Materials, and Applications,” Acc. Chem. Res., vol. 50, no. 8, pp. 1976–1987, 2017.

J. B. Ramos, M. T. Rosas, F. Á. Belmontes, G. N. Velázquez, and F. R. De Valle, “Caracterización de nanofibras de carbón modificadas superficialmente con plasma de etileno,” Prospectiva, vol. 9, no. 2, pp. 54–58, 2011.

L. Ahmed Sbia, A. Peyvandi, P. Soroushian, J. Lu, and A. M. Balachandra, “Enhancement of Ultrahigh Performance Concrete Material Properties with Carbon Nanofiber,” Adv. Civ. Eng., vol. 2014, 2014.

A. Yazdanbakhsh, Z. Grasley, B. Tyson, and R. Abu Al-Rub, “Distribution of carbon nanofibers and nanotubes in cementitious composites,” Transp. Res. Rec. J. Transp. Res. Board, vol. 2142, no. 2142, pp. 89–95, 2010.

M. Jamal, A. Khattab, and H. R. Rizvi, “Characterization of carbon nano-fiber modified hot mix asphalt mixtures,” Constr. Build. Mater., vol. 40, pp. 738–745, 2013.

D. Cetin, T. Sengul, M. M. Khachan, S. K. Bhatia, and S. O. Owen, “Dewatering Performance of Fiber Reinforced Fly Ash Slurry,” New Front. Geotech. Eng. GSP 243 © ASCE, pp. 98–107, 2014.

C. Shin and G. G. Chase, “Nanofibers from recycle waste expanded polystyrene using natural solvent,” Polym. Bull., vol. 55, no. 3, pp. 209–215, 2005.

R. Johnson and K. Rangaswamy, “Improvement of soil properties as a road base material using nano chemical solution,” 50th INDIAN Geotech. Conf. 17th – 19th DECEMBER 2015, no. December, p. 10, 2015.

S. M. Hejazi, M. Sheikhzadeh, S. M. Abtahi, and A. Zadhoush, “A simple review of soil reinforcement by using natural and synthetic fibers,” Constr. Build. Mater., vol. 30, pp. 100–116, 2012.

Z. H. Majeed and M. R. Taha, “A Review of Stabilization of Soils by using Nanomaterials,” Aust. J. Basic Appl. Sci., vol. 7, no. 2, pp. 576–581, 2013.

H. Jiang, Y. Cai, and J. Liu, “Engineering properties of soils reinforces by short discrete polypropylene fiber,” J. Mater. Civ. Eng., vol. 22, no. 12, pp. 1315–1322, 2010.

N. Phougat, “Stabilization of expansive soil,” Int. J. Curr. Eng. Sci., vol. 6, no. 4, pp. 88–96, 2017.

J. M. A. Alsharef, M. R. Taha, A. A. Firoozi, and P. Govindasamy, “Potential of using nanocarbons to stabilize weak soils,” Appl. Environ. Soil Sci., vol. 2016, 2016.

M. R. Taha, “Recent Developments in Nanomaterials for Geotechnical and Geoenvironmental Engineering Applications of Nanoparticles in Geotechnical and Geoenvironmental,” MATEC Web Conf. 149, vol. 02004, pp. 4–8, 2018.

M. R. Taha and J. M. A. Alsharef, “Use of nanocarbons to control swelling , shrinkage , and hydraulic conductivity of a residual soil,” Proc. 2nd Symp. Coupled Phenom. Environ. Geotech., no. November, 2017.

J. M. A. Alsharef, M. R. Taha, and T. A. Khan, “Physical dispersion of nanocarbons in composites – A review,” Technol. J., vol. 79, no. 5, pp. 69–81, 2017.

J. M. A. Alsharef, M. R. Taha, R. A. Al-Mansob, and T. A. Khan, “Influence of carbon nanofibers on the shear strength and comparing cohesion of direct shear test and AFM,” J. Nano Res., vol. 49, pp. 108–126, 2017.

Artículos más leídos del mismo autor/a