Diseño y fabricación de un prototipo a escala de una cámara con variación de humedad y temperatura para curado de concretos de activación alcalina elaborados a partir de mezclas de escoria siderúrgica y cenizas volantes
Diseño y fabricación de un prototipo a escala de una cámara con variación de humedad y temperatura para curado de concretos de activación alcalina elaborados a partir de mezclas de escoria siderúrgica y cenizas volantes
Barra lateral del artículo
PDF (English)
FLIP
(English)
HTML (English)
Contenido principal del artículo
Resumen
El estudio realizado da a conocer el diseño y fabricación de un prototipo modular a escala, de una cámara con variación de humedad y temperatura para curado de concretos de activación alcalina; elaborado a partir de mezclas de escoria siderúrgica y cenizas volantes, para ser montado directamente en obra; el estudio beneficia al sector industrial en el desarrollo de nuevos proyectos a dado que permite mejorar el desempeño, reducir riesgos y costos de transporte en los procesos de fabricación de los materiales que se presentan en la actualidad. El dispositivo requiere de la integración de distintos elementos mecánicos y electrónicos junto con conocimientos en el área del control y la programación para su correcto funcionamiento, además, es necesario un grado de precisión para garantizar niveles óptimos de resistencia en los diferentes tipos de concreto por activación alcalina, a partir del diseño y la buena elección de los materiales en la fabricación de la cámara.
Palabras clave: curado, humedad, temperatura, modular, concreto, escoria, ceniza
Abstract
Through this document, the design and manufacture of a prototype of a chamber with humidity and temperature variations for curing alkaline activation concretes made from mixtures of steel slag and flying ash is presented, to be mounted directly on site, this benefits the industrial sector in the development of new projects by improving performance, reducing risks and transportation costs in the manufacturing processes of these materials that are currently present. The device requires the integration of distinct mechanical and electronic elements along with knowledge in the control and programming area for its correct operation, with the degree of precision necessary to guarantee optimal levels of resistance in the different types of concrete by alkaline activation, emanating from the design and the right choice of materials for the construction of the chamber.
Keywords: curing, humidity, temperature, modular, concrete, slag, ash
Resumo
O estudo realizado revela o projeto e fabricação de um protótipo modular em escala, de uma câmara com variação de umidade e temperatura para a cura de concretos alcalinos ativados; feito de misturas de escória de aço e cinza volante, para ser montado diretamente no local; O estudo beneficia o setor industrial no desenvolvimento de novos projetos, pois permite melhorar o desempenho, reduzir riscos e custos de transporte nos processos de fabricação dos materiais que são apresentados hoje. O dispositivo requer a integração de diferentes elementos mecânicos e eletrônicos, juntamente com o conhecimento na área de controle e programação para operação adequada, além disso, um grau de precisão é necessário para garantir níveis ótimos de resistência em diferentes tipos de concreto por ativação alcalina, a partir do design e da boa escolha de materiais na fabricação da câmera
Palabras chave:
Descargas
Detalles del artículo
Imbabi, M. S., Carrigan, C., & McKenna, S. (2012). Trends and developments in green cement and concrete technology. International Journal Sustainable Built Environment, 1(2), 194–216. doi: 10.1016/j.cemconres.2011.03.019.
Provis, J.L., van Deventer J.S.J. Alkali-activated Materials: State-of-the-Art Report, RILEM TC 224-AAM, Springer/RILEM, Dordrecht, 2014.
O. Trocónis de Rincón, Duracon Collaboration "Durability of concrete structures: DURACON, an iberoamerican Project. Preliminary results", Building and Environment, 41, (2006), p. 952-962.
ACI Committee 318. Building code requirements for structural concrete (ACI 318-14) and commentary (318R-14). Michigan: American Concrete Institute; 2014.
Cárdenas, J., Lizarazo, J., Aperador, W., “Comportamiento mecánico de sistemas cementantes binarios (cemento portland –ceniza volante – escoria de alto horno),” Revista Latinoamericana de Metalurgia y Materiales, vol.16, no.1, pp.78-98, Diciembre 2015.
. M. Sahmaran, T. K. Erdem, I. O. Yaman "Sulfate resistance of plain and blended cements exposed to wetting-drying and heating-cooling environments", Construction and Building Materials, 21, (2007), p. 1771-1778.
. B. Johannesson, P. Utgenannt "Microstructural changes caused by carbonation of cement mortar", Cem. Concr. Res., 31, (2001), p. 925-931.
. E. T. Stepkowska "Simultaneous IR/TG study of calcium carbonate in two aged cement pastes", J. Therm. Anal. Cal., 84, (2006), p. 175-180.
. K. Garbev, P. Stemmermann, L. Black, C. Breen, J. Yarwood, B. Gasharova "Structural features of C-S-H (I) and its carbonation in air-a Raman spectroscopic study. Part I: Fresh phases", J. Am. Ceram. Soc., 90, (2007), p.900-907.22. J. Davidovits "Geopolymers: inorganic polymeric new materials", J. Thermal Anal., 37, p. 1633-1656, (1991).
H. Shin, J. Yang, Y.Yoon, D. Mitchell, “Mix design of concrete for prestressed concrete sleepers using blast furnace slag and steel fibers”, Cement and Concrete Composites, 74, 2016, p. 39-53.
C. Caruana, C. Yousif, P. Bacher, S. Buhagiar, C. Grima, “Determination of thermal characteristics of standard and improved hollow concrete blocks using different measurement techniques”, Journal of Building Engineering, 13 (2017), p 336-346,
S. Lim, V. Prabhu, M. Anand, L. Taylor, “Extra-terrestrial construction processes – Advancements, opportunities and challenges”, Advances in Space Research, 60, (2017), p. 1413-1429.
F. Bella, D. Pugliese, L. Zolin, C. Gerbaldi, “Paper-based quasi-solid dye-sensitized solar cells”, Electrochimica Acta, 237 (2017), p. 87-93,
J. Lizárraga, A. Ramírez, P. Díaz, J. Marcobal, J. Gallego, “Short-term performance appraisal of half-warm mix asphalt mixtures containing high (70%) and total RAP contents (100%): From laboratory mix design to its full-scale implementation”, Construction and Building Materials, 170 (2018), p. 433-445.
A.J. Buttress, D.A. Jones, C. Dodds, G. Dimitrakis, C.J. Campbell, A. Dawson, S.W. Kingman, Understanding the scabbling of concrete using microwave energy, Cement and Concrete Research, 75 (2015), p. 75-90
A. Duarte, B. Ferreira, P. Nóvoa, A. Torres, Multifunctional Material Systems: A state-of-the-art review, Composite Structures, 151 (2016), p. 3-35, [17]M. Criado, A. Fernández-Jiménez, A. Palomo "Alkali activation of fly ash. Effect of the SiO2/Na2O ratio. Part I: FTIR study", Microp. Mesop. Mat., (2007), (disponible on line).
A. Palomo, A. Fernández-Jiménez, C. López-Hombrados, J. L. Lleyda "Precast Elements Made Of Alkali-Activated Fly Ash Concrete", 8th CANMET/ACI International conference on fly ash, silica fume, slag and natural pozzolans in concrete, Las Vegas, USA, Supplementary Volume, p. 545-558, (2004).
