Cadena de Suministro Esbelta - Una revisión bibliométrica
Lean Supply Chain - A Bibliometric Review
Barra lateral del artículo
PDF (English)
FLIP
(English)
Contenido principal del artículo
En este artículo se presenta una revisión bibliométrica de documentos identificados en la base de datos Scopus sobre cadena de suministro esbelta. Se hace uso del software VOSviewer y la plataforma Bibliometrix para el análisis de 451 identificados con la ecuación de búsqueda TITLE-ABS-KEY ("lean supply chain") OR TITLE-ABS-KEY ("lean supply")). Los resultados indican que la producción de documentos en este tópico está en aumento, los principales autores son Moyano-Fuentes, J. y Tortorella, GL; sin embargo, Christopher y Towill son los autores más citados. Las principales revistas que publican este tópico son el International Journal of Six Sigma y el International Journal of Production Economics, mientras que las universidades más productivas son la Universidad Federal de Santa Catarina en Brasil y la Universidad de Jaen en España. La palabra clave más usadas por los autores son “supply chain management” y “lean supply chain”, siendo la primera la primera la que da origen a muchas otras. Los países más productivos en este tópico son Estados Unidos de America y Reino Unido; sin embargo, los más citados son los mismo, pero en orden inverso. Dado que en este año 2023 ya se tienen publicados 37 documentos sobre CSE, seis más que el año 2022, se concluye que este tópico continuará siendo de interés para académicos y científicos.
Descargas
Detalles del artículo
H. S. Sodhi, "Lean Six Sigma: a clinical treatment for the recovery of Indian manufacturing sector from the after-effects of coronavirus," World Journal of Science, Technology and Sustainable Development, vol. 17, no. 3, pp. 311-322, 2020, doi: 10.1108/WJSTSD-03-2020-0025. DOI: https://doi.org/10.1108/WJSTSD-03-2020-0025
C. Maware and D. M. Parsley, II, "Can Industry 4.0 Assist Lean Manufacturing in Attaining Sustainability over Time? Evidence from the US Organizations," Sustainability (Switzerland) , Article vol. 15, no. 3, 2023, Art no. 1962, doi: 10.3390/su15031962. DOI: https://doi.org/10.3390/su15031962
Y. Zhao, C. Yuan, J. Du, and Y. Wang. ICT-Based Information Platform Architecture of Maritime Cargo Transportation Supply Chain, International Conference on Application of Intelligent Systems in Multi-modal Information Analytics, MMIA 2020, vol. 1233 AISC, pp. 9-15, 2021. DOI: https://doi.org/10.1007/978-3-030-51431-0_2
N. Kumar, K. Mathiyazhagan, and D. Mathivathanan, "Modelling the interrelationship between factors for adoption of sustainable lean manufacturing: a business case from the Indian automobile industry," International Journal of Sustainable Engineering, Article vol. 13, no. 2, pp. 93-107, 2020, doi: 10.1080/19397038.2019.1706662. DOI: https://doi.org/10.1080/19397038.2019.1706662
S. Mojib Zahraee, A. Hashemi, A. Ali Abdi, A. Shahpanah, and J. Mohd Rohani, "Lean Manufacturing Implementation Through Value Stream Mapping: A Case Study," Jurnal Teknologi, vol. 68, no. 3, 05/01 2014, doi: 10.11113/jt.v68.2957. DOI: https://doi.org/10.11113/jt.v68.2957
P. Arunagiri and A. Gnanavelbabu, "Identification of Major Lean Production Waste in Automobile Industries using Weighted Average Method," Procedia Engineering, vol. 97, pp. 2167-2175, 2014/01/01/ 2014, doi: https://doi.org/10.1016/j.proeng.2014.12.460. DOI: https://doi.org/10.1016/j.proeng.2014.12.460
F. Naranjo, L. J. Menor, and P. F. Johnson, "Lean supply chain management: a contextual contingent reconceptualization and Delphi method study," International Journal of Operations and Production Management, Article vol. 43, no. 9, pp. 1456-1480, 2023, doi: 10.1108/IJOPM-07-2022-0436. DOI: https://doi.org/10.1108/IJOPM-07-2022-0436
R. R. Lummus, D. W. Krumwiede, and R. J. Vokurka, "The relationship of logistics to supply chain management: developing a common industry definition," Industrial Management & Data Systems, vol. 101, no. 8, pp. 426-432, 2001, doi: 10.1108/02635570110406730. DOI: https://doi.org/10.1108/02635570110406730
B. J. Gibson, J. T. Mentzer, and R. L. Cook, "SUPPLY CHAIN MANAGEMENT: THE PURSUIT OF A CONSENSUS DEFINITION," Journal of Business Logistics, vol. 26, no. 2, pp. 17-25, 2005, doi: https://doi.org/10.1002/j.2158-1592.2005.tb00203.x. DOI: https://doi.org/10.1002/j.2158-1592.2005.tb00203.x
Y. Yu, "Logistics cost control method of the core enterprise of the supply chain," DEStech Transactions on Social Science, Education and Human Science, vol. isehs, no. 2019, 2019, doi: https://doi.org/10.12783/dtssehs/isehs2019/31619. DOI: https://doi.org/10.12783/dtssehs/isehs2019/31619
S. Zailani and P. Rajagopal, "Supply chain integration and performance: US versus East Asian companies," Supply Chain Management: An International Journal, vol. 10, no. 5, pp. 379-393, 2005, doi: 10.1108/13598540510624205. DOI: https://doi.org/10.1108/13598540510624205
P. W. Stonebraker and R. Afifi, "Toward a contingency theory of supply chains," Management Decision, vol. 42, no. 9, pp. 1131-1144, 2004, doi: 10.1108/00251740410565163. DOI: https://doi.org/10.1108/00251740410565163
R. D. Lufika, H. Y. Sastra, P. D. Sentia, I. Ilyas, and I. Hasanuddin, "Supply Chain Risk Mapping at ABC Cement Plant in Aceh, Indonesia," Aceh International Journal of Science and Technology, vol. 11, no. 2, pp. 128-135, 2022, doi: 10.13170/aijst.11.2.23457. DOI: https://doi.org/10.13170/aijst.11.2.23457
W. Zhang, K. Kang, and R. Y. Zhong, "A cost evaluation model for IoT-enabled prefabricated construction prefabricated construction supply chain management," Industrial Management and Data Systems, Article vol. 121, no. 12, pp. 2738-2759, 2021, doi: 10.1108/IMDS-12-2020-0735. DOI: https://doi.org/10.1108/IMDS-12-2020-0735
P. Kouvelis and J. Niederhoff. On the globalization of operations and supply chain strategies: A conceptual framework and its application, International Series in Operations Research and Management Science, vol. 98, pp. 3-36, 2007. DOI: https://doi.org/10.1007/978-0-387-38429-0_1
B. Demil and X. Lecocq, "The Box: How the Shipping Container Made the World Smaller and the World Economy Bigger," Choice Reviews Online, vol. 44, no. 02, pp. 44-1048-44-1048, 2006, doi: 10.5860/choice.44-1048. DOI: https://doi.org/10.5860/CHOICE.44-1048
R. Bhatnagar, J. Jayaram, and Y. C. Phua, "RELATIVE IMPORTANCE OF PLANT LOCATION FACTORS: A CROSS NATIONAL COMPARISON BETWEEN SINGAPORE AND MALAYSIA," Journal of Business Logistics, vol. 24, no. 1, pp. 147-170, 2003, doi: https://doi.org/10.1002/j.2158-1592.2003.tb00035.x. DOI: https://doi.org/10.1002/j.2158-1592.2003.tb00035.x
A. J. Feely and A. W. Harzing, "Language management in multinational companies," Cross Cultural Management: An International Journal, vol. 10, no. 2, pp. 37-52, 2003, doi: 10.1108/13527600310797586. DOI: https://doi.org/10.1108/13527600310797586
M. Christopher and D. Towill, "An integrated model for the design of agile supply chains," International Journal of Physical Distribution & Logistics Management, vol. 31, no. 4, pp. 235-246, 2001, doi: 10.1108/09600030110394914. DOI: https://doi.org/10.1108/09600030110394914
J. Ben Naylor, M. M. Naim, and D. Berry, "Leagility: Integrating the lean and agile manufacturing paradigms in the total supply chain," International Journal of Production Economics, vol. 62, no. 1, pp. 107-118, 1999/05/20/ 1999, doi: https://doi.org/10.1016/S0925-5273(98)00223-0. DOI: https://doi.org/10.1016/S0925-5273(98)00223-0
R. Mason-Jones and D. R. Towill, "Time compression in the supply chain: information management is the vital ingredient," Logistics Information Management, vol. 11, no. 2, pp. 93-104, 1998. DOI: https://doi.org/10.1108/09576059810209964
D. Vasanth Kumar, G. Madhan Mohan, and K. M. Mohanasundaram, "Lean supply chain management in garment industry using value stream mapping," International Journal of Services and Operations Management, Article vol. 37, no. 1, pp. 133-143, 2020, doi: 10.1504/IJSOM.2020.109440. DOI: https://doi.org/10.1504/IJSOM.2020.10031555
S. L. Takeda-Berger, G. L. Tortorella, Í. R. S. Agostino, E. M. Frazzon, and T. T. Yokoyama, "Lean Supply Chain strategies based on the pull-production system: a simulation-based analysis," in 4th European International Conference on Industrial Engineering and Operations Management, IEOM 2021, M. Fargnoli et al., Eds., 2021: IEOM Society, pp. 90-101.
J. de Vries and R. Huijsman, "Supply chain management in health services: an overview," Supply Chain Management: An International Journal, vol. 16, no. 3, pp. 159-165, 2011, doi: 10.1108/13598541111127146. DOI: https://doi.org/10.1108/13598541111127146
X.-F. Shao, W. Liu, Y. Li, H. R. Chaudhry, and X.-G. Yue, "Multistage implementation framework for smart supply chain management under industry 4.0," Technological Forecasting and Social Change, vol. 162, p. 120354, 2021/01/01/ 2021, doi: https://doi.org/10.1016/j.techfore.2020.120354. DOI: https://doi.org/10.1016/j.techfore.2020.120354
M. Amini, C. C. Bienstock, and M. Golias, "Management of supply chains with attribute-sensitive products: a comprehensive literature review and future research agenda," The International Journal of Logistics Management, vol. 31, no. 4, pp. 885-903, 2020, doi: 10.1108/IJLM-11-2019-0306. DOI: https://doi.org/10.1108/IJLM-11-2019-0306
K. D. Endler, C. T. Scarpin, and M. T. Arns Steiner, "A bibliometric analysis of scientific production in lean supply," International Journal of Logistics Systems and Management, Review vol. 31, no. 1, pp. 82-108, 2018, doi: 10.1504/IJLSM.2018.094192. DOI: https://doi.org/10.1504/IJLSM.2018.10015226
N. Garcia-Buendia, J. Moyano-Fuentes, J. M. Maqueira-Marín, and M. J. Cobo, "22 Years of Lean Supply Chain Management: a science mapping-based bibliometric analysis," International Journal of Production Research, Review vol. 59, no. 6, pp. 1901-1921, 2021, doi: 10.1080/00207543.2020.1794076. DOI: https://doi.org/10.1080/00207543.2020.1794076
D. Oliveira-Dias, N. Garcia-Buendia, J. M. Maqueira-Marín, and J. Moyano-Fuentes, "Information technologies and lean and agile supply chain strategies: A bibliometric study through science mapping," Int. J. Bus. Environ. review vol. 12, no. 4, pp. 338-363, 2021, doi: 10.1504/IJBE.2021.10041811. DOI: https://doi.org/10.1504/IJBE.2021.118568
D. Gawade, "Agile Supply Chain in Manufacturing and Service Industry: Bibliometric and Content Analysis," Vision, Review vol. 27, no. 2, pp. 167-177, 2023, doi: 10.1177/09722629211002000. DOI: https://doi.org/10.1177/09722629211002000
Z. Zhang, N. Zhang, J. H. Sun, and J. L. Wang, "Emerging trends and developments in green supplier management: A bibliometric review and analysis," Journal of Intelligent and Fuzzy Systems, Article vol. 45, no. 3, pp. 3929-3949, 2023, doi: 10.3233/JIFS-222019. DOI: https://doi.org/10.3233/JIFS-222019
M. Yuvaraj, R. Jothi Basu, M. D. A. Abdulrahman, and C. Ganesh Kumar, "Implementation of information and communication technologies in fruit and vegetable supply chain: a systematic literature review," Industrial Management and Data Systems, Article vol. 123, no. 9, pp. 2349-2377, 2023, doi: 10.1108/IMDS-01-2023-0058. DOI: https://doi.org/10.1108/IMDS-01-2023-0058
N. Y. Yun and M. A. Ülkü, "Sustainable Supply Chain Risk Management in a Climate-Changed World: Review of Extant Literature, Trend Analysis, and Guiding Framework for Future Research," Sustainability (Switzerland) , Review vol. 15, no. 17, 2023, Art no. 13199, doi: 10.3390/su151713199. DOI: https://doi.org/10.3390/su151713199
S. Wen, H. Tang, F. Ying, and G. Wu, "Exploring the Global Research Trends of Supply Chain Management of Construction Projects Based on a Bibliometric Analysis: Current Status and Future Prospects," Buildings, Article vol. 13, no. 2, 2023, Art no. 373, doi: 10.3390/buildings13020373. DOI: https://doi.org/10.3390/buildings13020373
S. Qrunfleh, S. Vivek, and R. Merz, "ICT-Based Research Tools to Determine the Importance of Vaccine Distribution in Supply Chain Efficiency: Specific Case of Bibliometrix," in Lecture Notes in Networks and Systems, M. Tuba, S. Akashe, and A. Joshi, Eds, 2023, vol. 516: Springer Science and Business Media Deutschland GmbH, pp. 199-206, doi: 10.1007/978-981-19-5221-0_20. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85144576376&doi=10.1007%2f978-981-19-5221-0_20&partnerID=40&md5=bb3963f966264253ab30d08ed0ff6560
S. Okangba, N. Khatleli, and D. Root, "Indicators for construction projects supply chain adaptability using blockchain technology: A review," in Proceedings of International Structural Engineering and Construction, S. A. El Baradei, A. Abodonya, A. Singh, and S. Yazdani, Eds., 2021, vol. 8: ISEC Press, 1 ed. pp. CON-23, doi: 10.14455/ISEC.2021.8(1).CON-23. [Online]. Available: https://www.scopus.com/inward/record.uri?eid=2-s2.0-85113734538&doi=10.14455%2fISEC.2021.8%281%29.CON-23&partnerID=40&md5=305dd3138199ed940007e8a03db4bae7
D. R. Towill and A. Del Vecchio, "The application of filter theory to the study of supply chain dynamics," Production Planning and Control, Article vol. 5, no. 1, pp. 82-96, 1994, doi: 10.1080/09537289408919474. DOI: https://doi.org/10.1080/09537289408919474
M. Christopher and D. R. Towill, "Supply chain migration from lean and functional to agile and customised," Supply Chain Management, Review vol. 5, no. 4, pp. 206-213, 2000, doi: 10.1108/13598540010347334. DOI: https://doi.org/10.1108/13598540010347334
P. J. Martínez-Jurado and J. Moyano-Fuentes, "Lean management, supply chain management and sustainability: A literature review," Journal of Cleaner Production, Article vol. 85, pp. 134-150, 2014, doi: 10.1016/j.jclepro.2013.09.042. DOI: https://doi.org/10.1016/j.jclepro.2013.09.042
D. F. Simpson and D. J. Power, "Use the supply relationship to develop lean and green suppliers," Supply Chain Management, Article vol. 10, no. 1, pp. 60-68, 2005, doi: 10.1108/13598540510578388. DOI: https://doi.org/10.1108/13598540510578388
R. Lamming and J. Hampson, "The environment as a supply chain management issue," Br. J. Manage, Article vol. 7, no. SPEC. SPEC. ISS., pp. S45-S62, 1996, doi: 10.1111/j.1467-8551.1996.tb00147.x. DOI: https://doi.org/10.1111/j.1467-8551.1996.tb00147.x
R. Lamming, "Squaring lean supply with supply chain management," International Journal of Operations and Production Management, Review vol. 16, no. 2, pp. 183-196, 1996, doi: 10.1108/01443579610109910. DOI: https://doi.org/10.1108/01443579610109910
